Skip to content

Add an IP host

You can assign a hostname to an IP address, network, IP range, or IP list.

To add an IP host, do as follows:

  1. Go to Hosts and services > IP host and click Add.
  2. Enter the hostname.
  3. Select the IP version.
  4. Select the host Type.

    Note

    If you select Type as IP list, you can't add this host to an IP host group.

  5. Enter the IP address, subnet, IP range, or list of IP addresses, depending on the specified host type. For IP list, use only class B IP addresses. Separate the addresses using a comma.

  6. Click Save.