Skip to content

Add custom device property

In addition to the properties reported by a device itself, you can add custom properties to the device.


You can’t have a custom device property with the same name as a standard device property.

  1. On the menu sidebar, click Devices.
  2. Click the blue triangle next to the required device and then click Edit.
  3. On the Edit device page, go to the Custom properties tab and click Add custom property.

    If the Custom properties tab is not available, check that the Expert mode system setting is turned on (under Setup > General > Personal).

  4. Enter a name and a value for the property.

  5. Click Apply.
  6. Click Save.

The custom property is added to the device.